Showing posts with label Fix your Xbox 360. Show all posts
Showing posts with label Fix your Xbox 360. Show all posts

Wednesday, June 16, 2010

Repair Your Own Xbox 360

Xbox 360 repair is really not that hard if you take your time and follow some repair directions. Basic tools and some technical skill is required.

Nothing worse than owning a Xbox 360 and not being able to play your favorite game. Are you one of the many unfortunate XBOXers receiving the dreaded XBOX "Red Ring of Death" error?

First of all if your Xbox is still under warranty take it back to the store for repair, Do not open it as this will void your warranty. If it is out of warranty then go ahead and repair it yourself.

About 5% of Xbox 360s that receive this error cannot be repaired. This means that you have a very good chance of saving your Xbox 360 console! Repair may require a few items from your local Radio Shack or hardware store. Chances are you already have these items. You may need a soldering iron and solder.
Learning how to repair your XBox will save you some major money. Microsoft will not tell you how to fix these errors. They'll ask you to send your system back to them for repair. The typical cost for a repair can be as much as $140 plus shipping and handling. Also - they do not always guarantee a fix!
This guide will show you how to easily fix the 3 Red Light Error. I'll also cover over heating consoles, graphic errors, and freeze ups. the step by step repair guide is easy to understand, and will have you up and running in about an hour.
I have personally repaired 19 Xbox 360's with this guide with a 100% success rate. It includes easy to follow instructions including pictures of every step that is required. I am repairing them for friends and now the word is out and I am making some decent cash repairing Xbox 360's

This website will cover some of the basic repairs and mods but eventually you will need the complete Xbox 360 repair guide One repair will more that cover the cost of the manual. This is the easiest guide to follow.
Now The Guide Comes With Video!


Click Here To Download The Guide Now!

Saturday, September 29, 2007

Xbox 360 Controller Repair - An Easy Fix


If you ever missed a shot because of a bad controller this will help. Do you have sticky or dead buttons on your Xbox 360 controller? With a few basic tools you can repair it yourself.

I just wanted to smash my controller last time I hit a button 3 times and nothing happened. I was going for my all time personal best too.

Here is how to get your controller working like new again. grab a Phillips screwdriver and flip your controller over. Remove the 7 screws holding it together. Flip it right side up again and carefully remove the top.

Remove all the buttons and rubber pads they are sitting on. It is a good idea to lay them out on the floor or table, what ever you are working on, in the same pattern as they go in your controller. Makes it easier when you are trying to figure out what color goes where. You could also draw yourself a diagram before you remove the buttons.

You can wash the rubber pads with soap and water. Take some rubbing alcohol and a cotton swab and clean the black contacts on the board. DO NOT try to remove the black paths just rub until the dirt comes off and the cotton swab is clean, may take a few times.

Make sure everything is completely clean and dry. Turn your top cover over and start replacing your buttons. They should be keyed so they can only go in one way. Next put the rubber pads back in place on top of the buttons.

Replace the bottom cover and the screws. Check your buttons to make sure none of them stick. Your Xbox 360 game controller should now work like new again and you will not have to press hard on the buttons to get them to work.

Game controllers are built different for different types of game consoles but this procedure will work to repair any game controller.

Thursday, September 27, 2007

How To Remove A Stuck Game From Xbox 360

Halo 3 is stuck inside your Xbox 360 and you want to get it out. There is a way to manually remove it. First you will want to unplug the power for a few minutes to let your Xbox reset. Re-attach the power cord and see if you can now eject your DVD.

If that did not work turn the power off and unplug it. Remove the face plate on you Xbox console. You will need a thick paper clip or something similar. Straighten one end of it out. With the face plate removed you will see 2 small holes right underneath the DVD player and one hole to the right.

Since Xbox uses 3 different DVD drives the procedure will vary. If you have a Samsung or Toshiba drive use the small hole on the right. Should be right underneath the X on the DVD drive faceplate. Push your straightened paper clip in the hole until you feel it hit the gear. The gear needs to be spun from left to right. Poke around until you find it then push in gently until you feel it move. You will see the tray start to move out.

For Hitatchi DVD drives go for the first hole on the left. Beng DVD drives will use the middle hole. This requires the most pressure to get the gear to turn. You will see the tray start to move.

take your time and do not push too hard in case you are missing the correct spot. Once the tray starts to eject you can pull on it slightly to help it open. You should now be able to remove your Game.

Now why did your game get stuck in the first place? Could be a lot of different reasons. You may have to replace your DVD drive if you are having loading problems. See the guide before attempting this.

If you are having other problems with your Xbox 360 Get a copy of the repair manual here.